The easiest ways to check electrical wires are using a non-contact voltage tester to see if a wire is live, and a digital multimeter set to continuity or resistance (ohms) to check if a wire is intact. Heres how to check your LAN Cable using command prompt only.
Procedure:
View your network settings
> Press Win+R, type "cmd"
> type "ipconfig"
C:\Users\UnlockForUs>ipconfig
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::9bb5:c9ed:9df7:e2ea%6
IPv4 Address. . . . . . . . . . . : 192.168.0.125
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1 (computer before the internet comes)
CHECKING
C:\Users\UnlockForUs>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.0.1:
Packets: Sent = 3, Received = 3, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Zero LOSS means, no cut on wires...
ENJOY

0 Comments:
Post a Comment